MidiAccess

_MG_7449_thumbMidiAccess is a 1-in, 5-out MIDI Thru box, packaged into a 6HP Eurorack module.

The front panel has 1 DIN-format MIDI input and 2 DIN-format MIDI outputs; on the rear of the module there are three 2-pin headers that can provide behind-the-scenes MIDI to other modules in our range (at the moment, that’s just StringTheory, but we have a couple of others in the pipeline – a MIDI/CV Master Clock, MIDI to CV gates/triggers module and an expansion for MidiAccess that will add 3.5mm outputs in both mainstream formats).

This module continues to deliver our design approach of putting a 2-pin header on the back of every MIDI-enabled module that we make, so that you can bury all that pesky MIDI connectivity away inside your modular case if you want to. The front-panel DINs mean that you can also interface to other full-fat MIDI modules in your rack or to external gear.

The full kit includes a 20cm 16-way power/bus connector, 3 x 20cm 2-way jumper cables for connecting to other modules and 2 x M3/8mm screws for racking (these are also included with the assembled version).

Features

Width 6HP
Depth 35mm inc. power cable and MIDI headers
+12V 0
-12V 0
+5V Approx 10mA
Inputs Front panel DIN MIDI In
MIDI In 2-pin header at rear
Outputs Front panel 2 x DIN MIDI Thru
3 x 2-pin MIDI Thru header at rear
Controls N/A
CV N/A
Other N/A

Build instructions

The MidiAccess build instructions provide a clear guide to making this project.

Parts

The full parts list can be found in the build instructions. All of the parts used in this project are easily and widely obtained from any electronics supplier.

Our parts kits contain all of the electronic parts that you’ll need to do the job; the only things that we don’t supply are:

  • Tools
  • Solder

Prices

Item Price

PCB and panel

A PCB and matching 6HP Eurorack panel. Includes 2 x M3/8mm screws for mounting the panel into your rack.

£15.00

Full kit

A PCB, panel and all of the additional parts you need to build this project. Includes 2 x M3/8mm screws for mounting the panel into your rack, a 20cm 16-way power cable and 3 x 20cm 2-way jumper cables.

£28.00

Fully assembled

A fully-assembled MidiAccess module, ready to use. Includes 2 x M3/8mm screws for mounting the panel into your rack, a 20cm 16-way power cable and 3 x 20cm 2-way jumper cables. Please note that lead times will vary – contact us or see the shop for more details.

£48.00

Prices exclude post & packing. All prices are given in GBP, your local price after currency conversion may vary.